Free tools

Free scuba calculator

Scuba calculators

Free scuba calculators for nitrox MOD, equivalent air depth, best mix, SAC rate, RMV, and a dive weight starting point. Metric and imperial.

For planning and education only. Not a substitute for training, certification limits, or a dive computer.

Which calculator to open

You know the mix and you need the depth limit: nitrox MOD. You know the depth and you need a percent to ask for: best mix. You are about to read an air table with nitrox in the cylinder: EAD. You want to know what you breathe, or how long the gas above a reserve lasts at one depth: SAC rate. You are packing lead for a new suit or a new tank: the weight calculator, then a surface check.

All five run in the browser. Metric and imperial are a switch, not a second website. Seawater is 10 m or 33 ft per atmosphere. Fresh water is 10.3 m or 34 ft. None of them produces a no-decompression limit or a decompression schedule. Those need a validated algorithm, your training, and a dive computer or the tables from your course.

If you are still in entry-level training, start with the PADI Open Water guide and treat the weight and SAC pages as explanations of skills you practice with an instructor. Depth and nitrox limits show up again in Advanced Open Water and in the decompression sickness guide.

What every calculator on this page shares

Results update as you type. Nothing is saved. Planning depths for MOD round down. Best mix rounds down to a whole percent. Tank time rounds down to a whole minute. EAD shows a table depth rounded up, because a deeper equivalent depth is the shorter table time.

The numbers can affect a dive, so the formula and a worked example sit under each tool, with the source named. If a chart you already trust says 112 ft for EAN32 and this MOD page says 111 ft, both are the same 111.4 ft result with different rounding. Use the shallower planning depth.

Questions

Which scuba calculator should I use?
Use the MOD calculator when you know the mix and need the deepest depth for a PO2 limit. Use best mix when you know the depth and need an oxygen percent. Use EAD when you are comparing a nitrox dive with an air table. Use the SAC calculator to measure what you breathe and to estimate time at one depth. Use the weight calculator only as a first guess before a surface weight check.
Do these calculators plan no-decompression limits?
No. They do not produce a no-decompression limit, a dive table, or a decompression schedule. Those need a validated algorithm and your training. A dive computer or the tables from your course still set the time limit.
Do they work in meters and feet?
Yes. Each calculator has a metric and imperial switch. Depth uses 10 m or 33 ft per atmosphere in seawater, and 10.3 m or 34 ft in fresh water. Pressure is bar or psi. Cylinder volume is liters, or cubic feet at a rated pressure.
Are the calculators free, and do they store what I type?
They are free. The math runs in your browser. Nothing you type is sent to a server.
  • Nitrox MOD calculator. Maximum operating depth from the oxygen percent and a maximum PO2. Defaults to 1.4, with the 1.6 contingency.
  • EAD calculator. Equivalent air depth for a nitrox mix at a planned depth, in meters or feet.
  • Nitrox best mix calculator. The richest whole-percent oxygen mix for a planned depth and PO2, rounded down, capped at recreational limits.
  • SAC rate calculator. Surface air consumption and RMV from pressure used, tank size, depth, and time, plus how long a tank lasts.
  • Scuba weight calculator. A starting weight estimate from body weight, exposure suit, salt or fresh water, and tank type. Check it in the water.