Free tools / Scuba calculators

Free scuba calculator

Nitrox MOD calculator

Free nitrox MOD calculator for scuba diving. Maximum operating depth from oxygen percent and a max PO2 of 1.4, plus the 1.6 contingency. Meters or feet.

For planning and education only. Not a substitute for training, certification limits, or a dive computer.

Calculate MOD

Units

Water

Use the percent from your analyzer.

1.4 is the working limit. 1.6 is shown as contingency.

Plan no deeper than

33 m

Calculated 33.8 m / 111 ft

Exact seawater-style result in this water: 33.75 m. The calculated meters are the exact depth to one decimal. Feet are the nearest foot. The planning depth is rounded down.

Contingency at PO2 1.6: plan no deeper than 40 m. Calculated 40 m / 132 ft.

What maximum operating depth means

Maximum operating depth is the deepest point at which the oxygen in your mix stays at the partial pressure you chose. Partial pressure rises with depth even though the oxygen percent in the cylinder does not change. Past the MOD, the risk of a central nervous system oxygen toxicity seizure goes up. DAN describes that limit as the reason nitrox is not a deep-diving gas.

NOAA defines nitrox as 22% to 40% oxygen and sets 1.40 ATA as the maximum PO2 for open-circuit nitrox diving. The same manual allows 1.60 ATA during the decompression phase of a planned decompression dive. Recreational courses teach 1.4 as the number you plan with, and 1.6 as a contingency if you are briefly deeper than you meant to be. This page shows both. It does not tell you how long you may stay. There is no no-decompression limit here.

If you are building the depth skills in Advanced Open Water, the MOD is the extra ceiling that appears the day you put enriched air in the cylinder. The nitrogen story, and why nitrox does not cancel decompression sickness, is in the decompression sickness guide.

Formula and a worked example

Absolute pressure in seawater is depth / 10 + 1 in meters, or depth / 33 + 1 in feet. Fresh water uses 10.3 m or 34 ft per atmosphere, because fresh water is less dense: you have to go slightly deeper to reach the same pressure. NOAA states some limits in both feet of seawater and feet of freshwater (134 fsw or 138 ffw is one example), which is the same 33 ft and 34 ft pair.

ATA = depth / 10 + 1 (seawater, meters)

ATA = depth / 33 + 1 (seawater, feet)

MOD = (PO2 / FO2 - 1) x 10 m, or x 33 ft

EAN32 at a PO2 of 1.4 in seawater: (1.4 / 0.32 - 1) x 10 = 33.75 m, shown as 33.8 m. In feet: (1.4 / 0.32 - 1) x 33 = 111.4 ft, shown as 111 ft. Plan no deeper than 33 m / 111 ft. That is the reference pair: about 33.8 m / 111 ft, with the planning depth rounded down.

EAN36 at the same PO2: (1.4 / 0.36 - 1) x 10 = 28.89 m, shown as 28.9 m, and 95.3 ft, shown as 95 ft. Plan no deeper than 28 m / 95 ft. About 28.9 m / 95 ft.

PADI's nitrox article states 34 m / 112 ft for EANx32, and a DAN Alert Diver article states 112 ft for 32% and 95 ft for 36%, both at 1.4 ATA. The 112 ft figure is 111.4 ft rounded up. This calculator rounds the planning depth down, so 32% is 111 ft and 33 m. Use the shallower number on the slate.

Common mistakes

Planning from the percent you ordered instead of the percent the analyzer shows. A 1% error is a different MOD.

Rounding the MOD up, or running the dive at the MOD because the math says you can. The planning depth here is already rounded down. Treat it as a ceiling, not a target.

Using 1.6 as the everyday limit. NOAA holds the working dive at 1.4 ATA. The 1.6 line is contingency, and on this page it is labeled that way.

Copying a seawater MOD into a lake. Switch the water type. Fresh water moves the depth a little deeper for the same pressure.

Thinking nitrox lets you go deeper than air. It does the opposite for oxygen. The best mix calculator starts from the depth and works back to a percent. The EAD calculator is the nitrogen side, for an air table only.

Sources

Questions

What is maximum operating depth?
Maximum operating depth (MOD) is the deepest depth at which a breathing mix stays at or under the partial pressure of oxygen you choose. Past that depth the oxygen partial pressure is higher than the limit you set.
Should I use a PO2 of 1.4 or 1.6?
NOAA's diving standards set 1.40 ATA as the maximum PO2 for open-circuit nitrox on the working portion of a dive, and allow 1.60 ATA during decompression. Recreational training generally plans the dive at 1.4 and treats 1.6 as a contingency, not the target. This calculator shows both.
Why do some charts list EAN32 at 112 feet or 34 meters?
The seawater formula gives 111.4 ft and 33.75 m for 32% oxygen at a PO2 of 1.4. PADI's nitrox article states 34 meters / 112 feet, and a DAN Alert Diver article states 112 feet. Those are the same result rounded up. This calculator shows 33.8 m and 111 ft, and it rounds the planning depth down to 33 m and 111 ft.
Does a nitrox MOD calculator give no-decompression time?
No. MOD is only the oxygen depth limit. It does not say how long you can stay. Time still comes from your training, your dive computer, or air tables used with equivalent air depth.
The blender wrote 32% on the tank. Can I use 32 here?
Only after you analyze the cylinder yourself. Plan the MOD from the oxygen percent you measured, not from the percent you ordered. If the analyzer reads higher than you expected, the MOD is shallower.
  • Scuba calculators. Nitrox MOD, equivalent air depth, best mix, SAC rate, and a starting weight estimate. Free, in the browser.
  • EAD calculator. Equivalent air depth for a nitrox mix at a planned depth, in meters or feet.
  • Nitrox best mix calculator. The richest whole-percent oxygen mix for a planned depth and PO2, rounded down, capped at recreational limits.
  • SAC rate calculator. Surface air consumption and RMV from pressure used, tank size, depth, and time, plus how long a tank lasts.
  • Scuba weight calculator. A starting weight estimate from body weight, exposure suit, salt or fresh water, and tank type. Check it in the water.